D-Link DMS-3130 User Manual - Page 181

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings, as shown below: Figure 5-68 IGMP Snooping Groups Settings Window The fields that can be configured in IGMP Snooping Static Groups Settings are described below: Parameter VID Group Address Unit From Port - To Port VID Group Address Description Enter a VLAN ID of the multicast group. The range is from 1 to 4094. Enter an IP multicast group address. Valid address range is from 224.0.0.0 to 239.255.255.255. Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the appropriate port range used for the configuration here. Click the radio button and enter a VLAN ID of the multicast group. The range is from 1 to 4094. Click the radio button and enter an IP multicast group address. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. The fields that can be configured in IGMP Snooping Groups Table are described below: Parameter VID Group Address Detail Description Click the radio button and enter a VLAN ID of the multicast group. The range is from 1 to 4094. Click the radio button and enter an IP multicast group address. Select this option to display the IGMP group detail information. 170