D-Link DMS-3130 User Manual - Page 440
DDM Voltage Threshold Settings, DDM Bias Current Threshold Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 440 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide DDM Voltage Threshold Settings This window is used to display and configure the DDM Voltage Threshold Settings for specific ports on the Switch. To view the following window, click OAM > DDM > DDM Voltage Threshold Settings, as shown below: Figure 10-29 DDM Voltage Threshold Settings Window The fields that can be configured are described below: Parameter Unit Port Action Type Value Description Select the Switch unit that will be used for this configuration here. Select the port used for the configuration here. Note: Port number specific to fiber optical transceivers will not be available if stacking is enabled (refer to Management > Stacking). Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of voltage threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Enter the threshold value. This value must be between 0 and 6.55 Volt. Click the Apply button to accept the changes made. DDM Bias Current Threshold Settings This window is used to display and configure the threshold of the bias current for specific ports on the Switch. To view the following window, click OAM > DDM > DDM Bias Current Threshold Settings, as shown below: Figure 10-30 DDM Bias Current Threshold Settings Window 429