D-Link DMS-3130 User Manual - Page 272

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Action Description • RIP - Specifies that the CPU will discard RIP Layer 3 control packets sent to it. • VRRP - Specifies that the CPU will discard VRRP Layer 3 control packets sent to it. Select the action that will be taken here. Options to choose from are: • Add - Specifies to add a new entry based on the information entered. • Delete - Specifies to delete an entry based on the information entered. Click the Apply button to accept the changes made. The fields that can be configured in Control Packet CPU Filtering Settings are described below: Parameter Unit From Port - To Port Description Select the Switch unit that will be used for this display here. This option is only available when stacking is enabled. Select the range of ports that will be used for this display here. Click the Find button to find and display entries based on the selections made. IP Route Filter Route Map This window is used to display and configure the route map settings. To view the following window, click L3 Features > IP Route Filter > Route Map, as shown below: Figure 6-84 Route Map Window The fields that can be configured are described below: Parameter Route Map Name Direction Description Enter the route map name here. This name can be up to 16 characters long. Select the direction for this rule here. Options to choose from are Permit and Deny. 261