D-Link DMS-3130 User Manual - Page 423

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Description • 100ms-1sec - The transmission period is 100 milliseconds and the diagnostic interval is 1 second. • 1sec-10sec - The transmission period is 1 second and the diagnostic interval is 10 seconds. This is the default value. • 10sec-1min - The transmission period is 10 seconds and the diagnostic interval is 1 minute. Percentile PDU Priority Enter the percentile value here. This specifies the percentile of Frame Delay (FD) and Frame Delay Variation (FDV) measurement. The range is from 0 to 100. The default value is 75. Select the PDU priority value here. The range is from 0 to 7and none. This specifies the 802.1p priority to be set in the DMM messages transmitted by the MEP. The default value is the PDU priority of the MEP. Click the Apply button to accept the changes made. The fields that can be configured in Clear CFM DM are described below: Parameter Type Description Select the type of information to clear here. Options to choose from are: • Result - Specifies to clear the stored DM results. • Statistics - Specifies to clear the stored statistics of ETH-DM frames (DMM and DMR). Click the Clear button to clear the CFM DM statistics information based on the selection made. Click the Clear All button to clear all the CFM DM statistics information. Click the Back button to return to the previous window. After clicking the Edit LM button, the following page will appear. Figure 10-11 CFM Settings (Add MA, Add MEP, Edit LM) Window 412