D-Link DMS-3130 User Manual - Page 427

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click OAM > CFM > CFM Linktrace Settings, as shown below: Figure 10-15 CFM Linktrace Settings Window The fields that can be configured in CFM Linktrace Settings are described below: Parameter MAC Address MEPID MA Name Domain Name TTL PDU Priority Description Enter the destination MAC address here. Enter the MEP ID here used to initiate the link-trace feature. The range is from 1 to 8191. Enter the MA name here. The name can be up to 22 characters long. Enter the MD name here. The name can be up to 22 characters long. Enter the link-trace message's TTL value here. The range is from 2 to 255. The default value is 64. Select the 802.1p priority to be set in the transmitted LBMs here. If not specified, it uses the same priority as the CCMs sent by the MA. The range is from 0 to 7 and none. Select the None option to use the default setting. Click the Apply button to accept the changes made. The fields that can be configured in Find and Clear CFM Linktrace are described below: Parameter MEPID MA Name Domain Name Description Enter the MEP ID here. The range is from 1 to 8191. Enter the MA name here. The name can be up to 22 characters long. Enter the MD name here. The name can be up to 22 characters long. Click the Find button to locate a specific entry based on the information entered. Click the Clear button to clear the entries based on the information specified. Click the Clear All button to clear the information associated with all entries. Click the Show Detail button to view more detailed information about the link-trace entry. 416