D-Link DMS-3130 User Manual - Page 220

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Figure 6-12 IPv6 Interface (Detail, IPv6 Interface Settings) Window The fields that can be configured are described below: Parameter IPv6 MTU IPv6 State Description Enter the IPv6 MTU value here. The range is from 1280 to 12270 bytes.This parameter is used to configure the MTU to be advertised in RA messages. Select to enable or disable the IPv6 interface global state here. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. The fields that can be configured for IPv6 Address Autoconfig are described below: Parameter State Description Select to enable or disable the automatic configuration of the IPv6 address for this interface. Click the Apply button to accept the changes made. The fields that can be configured for Static IPv6 Address Settings are described below: Parameter IPv6 Address Description Enter the IPv6 address with prefix length (e.g. 2003:DD8:ABCD:12::1/64) for this IPv6 interface here. Select the EUI-64 option to configure an IPv6 address on the interface using the EUI-64 interface ID. Select the Link Local option to configure a link-local address for the IPv6 interface. Click the Apply button to accept the changes made. The fields that can be configured for NS Interval Settings are described below: Parameter NS Interval Description Enter the Neighbor Solicitation (NS) interval value here. The range is from 0 to 3600000 milliseconds, in multiples of 1000. If the specified time is 0, the router will use 1 second on the interface and advertise 0 (unspecified) in the Router Advertisement (RA) message. Click the Apply button to accept the changes made. 209