D-Link DMS-3130 User Manual - Page 468

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Destination File Replace Description Select the Switch unit that will be used for this configuration here. Enter the TFTP server IP address here. When select the IPv4 option, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the configuration file located on the TFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the configuration file should be stored on the Switch. (You can obtain the current directory structure on the Switch in Management > File System.) This field can be up to 64 characters long. Or select the running-config option to restore and overwrite the running configuration file on the Switch or select the startup-config option to restore and overwrite the start-up configuration file on the Switch. Select this option to replace the configuration file on the Switch with this one. Click the Restore button to initiate the configuration restore. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 13-8 Configuration Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the runningconfig option to back up the running configuration file from the Switch or select the startup-config option to back up the start-up configuration file from the Switch. For a complete list of firmware files stored on the Switch, go to Management > File System. Click the Backup button to initiate the configuration file backup. The file will be downloaded to your browser's default download directory. Configuration Backup to TFTP This window is used to initiate a configuration file backup to a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as shown below: 457