D-Link DMS-3130 User Manual - Page 367

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Figure 9-48 ARP Inspection Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Rate Limit Burst Interval Trust State Description Select the Switch unit that will be used for this configuration here. This option is only available if stacking is enabled. Select the appropriate port range used for the configuration here. Enter the rate limit value here. This value must be between 1 and 150 packets per seconds. Enter the burst interval value here. This value must be between 1 and 15. Tick the None option to disable the option. Select to enable or disable the trust state here. Click the Apply button to accept the changes made. Click the Set to Default button to change the information to the default values. ARP Inspection VLAN This window is used to display and configure the ARP inspection VLAN settings. To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Inspection VLAN, as shown below: Figure 9-49 ARP Inspection VLAN Window The fields that can be configured are described below: Parameter VID List Description Enter the VLAN ID list used here. 356