D-Link DMS-3130 User Manual - Page 445

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Click the Delete button to delete the specified entry based on the information entered/selected. The fields that can be configured for VLAN Counter Table are described below: Parameter Interface VLAN Traffic Direction Description Enter the VLAN ID that will be used here. The range is from 1 to 4094. Select the All option to display counter information associated with all VLAN interfaces. Select the traffic direction here. Options to choose from are: • RX - Specifies to count ingress traffic. • TX - Specifies to count egress traffic. • Both - Specifies to count ingress and egress traffic. Click the Find button to display entries in the table based on the information entered/selected. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Utilization Port Utilization This window is used to view the port utilization table. To view the following window, click Monitoring > Utilization > Port Utilization, as shown below: Figure 11-2 Port Utilization Window The fields that can be configured are described below: Parameter Unit From Port - To Port Description Select the Switch unit that will be used here.This option is only available if stacking is enabled. Select the range of ports that will be used here. Click the Find button to display entries in the table based on the information entered/selected. Click the Refresh button to refresh the information displayed in the table. 434