D-Link DMS-3130 User Manual - Page 78

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Binding, as shown below: Figure 4-42 DHCPv6 Server Binding Window The fields that can be configured are described below: Parameter IPv6 Address Description Enter the binding entry IPv6 address to be displayed or cleared here. Select the All option to display or clear all DHCPv6 client prefix bindings in or from the binding table. Click the Find button to locate a specific entry based on the information entered. Click the Clear button to clear the entries based on the information specified. DHCPv6 Server Interface Settings This window is used to display and configure the DHCPv6 server interface settings. To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Interface Settings, as shown below: Figure 4-43 DHCPv6 Server Interface Settings Window The fields that can be configured are described below: Parameter Interface VLAN Pool Name Rapid Commit Preference Description Enter the interface VLAN ID here. The range is from 1 to 4094. Enter the DHCPv6 server pool name here. This name can be up to 12 characters long. Select to enable or disable two-message exchange here. By default, twomessage exchange is not allowed. Enter the preference value here. 67