D-Link DMS-3130 User Manual - Page 234

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide After clicking the Edit button, the following page will appear. Figure 6-30 RIP interface (Edit) Window The fields that can be configured in Configure RIP interface are described below: Parameter Send Version Receive Version Send v2-broadcast Authentication Mode Authentication Text Password Description Select a RIP version to send on the interface. Options to choose from are v1(RIPv1) and v2(RIPv2). Select a RIP version or both to receive on the interface. Options to choose from are v1(RIPv1), v2(RIPv2) and v1/v2(Both). Select to enable or disable the sending of version 2 RIP update packets as broadcast packets instead of multicast packets. Select to disable or enable text authentication mode. Enter the authentication text password. It will be used if authentication mode is enabled. The password can be up to 16 characters long. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. RIP Database This window is used to display the Routing Information Protocol (RIP) routing database. Summary address entries will appear in the database only if relevant child routes exist and are being summarized. When the last child route for a summary address becomes invalid, the summary address is also removed from the routing table. To view the following window, click L3 Features > RIP > RIP Database, as shown below: Figure 6-31 RIP Database Window The fields that can be configured are described below: Parameter Description Network Address Enter the network and the network mask of the network(s) to be displayed here. 223