D-Link DMS-3130 User Manual - Page 22

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Description • 2500M Slave - Specifies to force the port speed to 2.5 Gbps and operates as the slave, to facilitate the timing of transmit and receive operations. • 5G - Specifies to force the port speed to 5 Gbps. • 5G Master - Specifies to force the port speed to 5 Gbps and operates as the master, to facilitate the timing of transmit and receive operations. • 5G Slave - Specifies to force the port speed to 5 Gbps and operates as the slave, to facilitate the timing of transmit and receive operations. • 10G - Specifies to force the port speed to 10 Gbps. • 10G Master - Specifies to force the port speed to 10 Gbps and operates as the master, to facilitate the timing of transmit and receive operations. • 10G Slave - Specifies to force the port speed to 10 Gbps and operates as the slave, to facilitate the timing of transmit and receive operations. • 25G - Specifies to force the port speed to 25 Gbps. Notes: 1. The available speeds depend on the models and types of fiber optic transceivers. For the support of the speeds on each port, refer to the DMS-3130-Series HW Installation Guide. 2. The last 4 fiber optic ports must operate at the same speed. Capability Advertised Description When the Speed is set to Auto, select the capabilities to be advertised during auto-negotiation. Check the box to enter a description for the corresponding port here. This can be up to 64 characters. Click the Apply button to accept the changes made. Port Status This window is used to view the Switch's physical port status and settings. To view the following window, click System > Port Configuration > Port Status, as shown below: Figure 3-5 Port Status Window Refer to the above Port Settings for more information on the status shown here. 11