D-Link DMS-3130 User Manual - Page 20

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Thermal High Threshold Low Threshold Description Select the thermal sensor ID. Enter the high threshold value of the warning temperature setting. The range is from -100 to 200 degrees Celsius. Tick the Default check box to return to the default value. Enter the low threshold value of the warning temperature setting. The range is from -100 to 200 degrees Celsius. Tick the Default check box to return to the default value. Click the Apply button to accept the changes made. Port Configuration Port Settings This window is used to display and configure the Switch's port settings. To view the following window, click System > Port Configuration > Port Settings, as shown below: Eth1/0/1 means that the port is numbered Unit 1 (of the stack)/Module 0 (of the system) /Port 1 (physical port number). The port number can be referenced in the diagram displayed in the header above. Figure 3-4 Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Description Select the stacking unit ID of the Switch that will be configured here. This option is only available when stacking is enabled. Select the appropriate port range used for the configuration here. The port number can be referenced in the diagram displayed in the header above. Note: Port number specific to fiber optical transceivers will not be available if stacking is enabled (refer to Management > Stacking). 9