D-Link DMS-3130 User Manual - Page 277
SNMP Server Traps VRRP
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Figure 6-89 VRRP Settings Window The fields that can be configured in VRRP Settings are described below: Parameter SNMP Server Traps VRRP New Master SNMP Server Traps VRRP Auth Fail Non-owner-ping Response Description Select to enable or disable the SNMP server traps feature for the new VRRP master. If enabled, once the device has transitioned to the master state, a trap will be sent out. Select to enable or disable the SNMP server traps feature for authentication failures. If enabled, if a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type, then a trap will be sent out. Select to enable or disable the non-owner ping response feature here. This feature is used to enable the virtual router in the master state to respond to ICMP echo requests for an IP address not owned but associated with this virtual router. Click the Apply button to accept the changes made. The fields that can be configured in Virtual Router Settings are described below: Parameter VLAN VRID Virtual IP Address VRRP Authentication Interface Name Description Enter the VLAN interface ID used here. The range is from 1 to 4094. Enter the virtual router ID used here. This ID is used to identify the virtual router in the VRRP group. The range is from 1 to 255. Enter the IPv4 address for the created virtual router group here. Select to enable and then enter the plain text authentication password for VRRP authentication on the interface here. This string can be up to 8 characters long. The authentication is applied to all virtual routers on this interface. The devices in the same VRRP group must have the same authentication password. Enter the interface name used here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. 266