D-Link DMS-3130 User Manual - Page 114
PPPoE Circuit ID Insertion Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Date Save Before Reboot Description Select and enter the date at which the reboot should be initiated here. This date uses the following format: DD/MM/YYYY. For example, 23/12/2015. The reboot schedule can only be initiated within 30 days of configuration. Select this option to save all configuration changes made before the reboot is initiated. Click the Apply button to accept the changes made. Click the Delete button to remove the specified reboot schedule. PPPoE Circuit ID Insertion Settings This window is used to display and configure the PPPoE Circuit ID Insertion Settings. To view the following window, click Management > PPPoE Circuit ID Insertion Settings, as shown below: Figure 4-87 PPPoE Circuit ID Insertion Global Settings Window The fields that can be configured in PPPoE Circuit ID Insertion Settings are described below: Parameter Global PPPoE State Description Select this option to enable or disable the PPPoE Circuit ID Insertion on the Switch. Select Disabled to disable PPPoE Circuit ID Insertion on the Switch. Click the Apply button to accept the changes made. The fields that can be configured in PPPoE Circuit ID Insertion Port Settings are described below: Parameter Unit From Port - To Port State Circuit ID Type Description Select the stacking unit ID of the Switch that will be configured here. This option is only available when stacking is enabled. Select the range of ports that will be used for this configuration here. Select to enable or disable the PPPoE Circuit ID Insertion Port state here. Specifies that the IP, MAC, or expert UDF format will be used. Click the Apply button to accept the changes made. 103