D-Link DMS-3130 User Manual - Page 165

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide More information about the ERPS Version Settings: Parameter ERPS Version Description G.8032v2 provides the following functions: • Supports multi-instance in a physical ring. • Supports operation commands: manual, force, and clear. • Supports to configure the sending of the R-APS PDU destination address with the RING-ID of the physical ring. If Ethernet ring nodes running ITU-T G.8032v1 and ITU-T G.8032v2 co-exist on an Ethernet ring, the following configurations should be made on the G.8032v2 device: • All physical ring IDs must have the default value of 1. • The major ring instance and sub-ring instance of the interconnection node must have different R-APS VLAN IDs. • Manual switch or force switch command must not exist. • The physical ring must have only one instance. The fields that can be configured in ERPS Global Settings are described below: Parameter ERPS Trap State Description Enable or disable trap function for ERPS events. Click the Apply button to accept the changes made. The fields that can be configured in Ethernet Ring G.8032 are described below: Parameter Ring Name Description Enter the Ethernet Ring Protection (ERP) instance name here. This name can be up to 32 characters long. Click the Apply button to create an ITU-T G.8032 ERP physical ring. Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring. Click the Show Detail button to view the ITU-T G.8032 ERP physical ring status information. Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After click the Edit Ring button, the following window will appear. Figure 5-52 ERPS (Edit Ring) Window 154