D-Link DMS-3130 User Manual - Page 33
System Log
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter From Port - To Port PD Alive State PD IP Address PD IPv6 Address Residential VLAN (1-4094) Poll Interval (sec) Retry Count Waiting Time (30-300) Action Description Select the appropriate port range used for the configuration here. Select to enable or disable the state of the PoE alive function on the specified port(s) here. Enter the IPv4 address of the target PD here. Enter the IPv6 address of the target PD here. The VLAN ID assigned to the designated ports. Enter the poll interval value here. The range is from 10 to 300 seconds. This is the interval at which ping requests will be sent to the target PD to check the status. Enter the retry count value here. The range is from 0 to 5. This is the number of times that the ping request will be resend if the target PD does not respond. Enter the waiting time value here. The range is from 30 to 300 seconds. This is the time the Switch will wait for the PD to recover from rebooting. Select the action that will be taken here. Options to choose from are: • Reset - Specifies to reset the PoE port state. • Notify - Specifies to send logs and traps to notify the administrator. • Both - Specifies to send logs and traps and then to reset the PoE port state. Click the Apply button to accept the changes made. System Log System Log Settings This window is used to display and configure the system log settings. To view the following window, click System > System Log > System Log Settings, as shown below: 22