D-Link DMS-3130 User Manual - Page 233
RIP Interface Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Interface Name Description Enter the interface name that will be used here. This name can be up to 12 characters long. Note that RIP needs to be enabled to enter an ACL name here. Refer to RIP > RIP Settings and L3 Features > Interface. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. RIP Interface Settings This window is used to display and configure the RIP interface settings. To view the following window, click L3 Features > RIP > RIP Interface Settings, as shown below: Figure 6-29 RIP Interface Settings Window The fields that can be configured are described below: Parameter Network Passive Interface Description Enter the IPv4 network address used by RIP here. Interfaces that have a subnet belonging to the network specified here will be activated for RIP. Select to enable or disable the passive interface feature here. This feature is used to disable the sending and receiving of routing updates on an interface. However, RIP packets from other routers received on this interface will continue to be processed. Enter the name of the passive interface in the space provided. This name can be up to 12 characters long. Select the Default option to use this as the default for all interfaces. Click the Apply button to accept the changes made. Click the Delete button to delete an entry based on the information entered. Click the Edit button to configure the specific entry. 222