D-Link DMS-3130 User Manual - Page 99

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide configuration still remains in the database of the remaining Switches in the stack and those functions will not be affected. NOTE: If there is a Box ID conflict when the stack is in the discovery phase, the device will enter a special standalone topology mode. Users can only get device information, configure Box IDs, save and reboot. All stacking ports will be disabled and an error message will be produced on the local console port of each device in the stack. Users must reconfigure Box IDs and reboot the stack to rectify the problem. NOTE: When constructing a stacking with different switch models, static box_id setting is recommended. If a new inserted switch box_id's device type is different from the configuration file box_id's device type, the new inserted switch will use default configurations. Physical Stacking This window is used to display and configure the physical stacking settings. To view the following window, click Management > Stacking > Physical Stacking, as shown below: Figure 4-70 Physical Stacking Window The fields that can be configured in Physical Stacking are described below: Parameter Stacking Mode Trap State Description Select this option to enable or disable the stacking mode. Select this option to enable or disable stacking related SNMP traps. Click the Apply button to accept the changes made. The fields that can be configured in Stack ID are described below: Parameter Current Unit ID Description Select the unit ID of the Switch in the stack. 88