D-Link DMS-3130 User Manual - Page 83

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Information Option Description • Replace - Select to replace the packet that already has the relay option. The packet will be replaced with a new option. Select this option to enable or disable the insertion of relay agent information (Option 82) during the relay of DHCP request packets. Click the Apply button to accept the changes made. Click the Edit button to modify the corresponding interface. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. DHCP Relay Information Option Format Settings This window is used to display and configure the DHCP information format. To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information Option Format Settings, as shown below: Figure 4-52 DHCP Relay Information Option Format Settings Window The fields that can be configured in DHCP Relay Information Option Format Global are described below: Parameter Information Format Remote ID Description Select the DHCP information remote ID sub-option. Options to choose from are: • Default - Select to use the Switch's system MAC address as the remote ID. • User Define - Select to use a user-defined remote ID. Enter the userdefined string with the maximum of 32 characters in the text box. • Vendor2 - Select to use vendor 2 as the remote ID. • Expert UDF - Select to use the expert UDF remote ID. Select the stand- alone unit format after this selection here. Information Format Circuit ID Select the DHCP information circuit ID sub-option. Options to choose from are: • Default - Select to use the default circuit ID sub-option. • User Define - Select to use a user-defined circuit ID. Enter the user- defined string with the maximum of 32 characters in the text box. • Vendor1 - Select to use vendor 1 as the circuit ID. • Expert UDF - Select to use the expert UDF circuit ID. Select the stand- alone unit format after this selection here. 72