D-Link DMS-3130 User Manual - Page 418

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter SenderID TLV Description This option is used to configure the transmission of the sender ID TLV by MPs for an MA. Select one of the following options: • None - Specifies not to transmit the sender ID TLV. In the CFM hardware mode, the value is fixed to none. • Chassis - Specifies to transmit the sender ID TLV with the chassis ID information. • Manage - Specifies to transmit the sender ID TLV with the managed address information. • Chassis_Manage - Specifies to transmit the sender ID TLV with the chassis ID information and the managed address information. • Defer - Specifies to inherit the setting configured for the maintenance domain that the MA is associated with. This is the default value. MEPID List Enter the Maintenance association End Point (MEP) ID contained in the MA here. The range is from 1 to 8191. Click the Apply button to accept the changes made. After clicking the Add MEP button, the following page will appear. Figure 10-5 CFM Settings (Add MA, Add MEP) Window The fields that can be configured are described below: Parameter MEPID Port Direction Description Enter the MEP ID here. The range is from 1 to 8191. Each MEP configured in the same MA must have a unique MEP ID. The MEP on different MA can have the same MEPID. Before creating a MEP, its MEP ID should be configured in the MA's MEP ID list. Select the Switch unit ID and port number that will be used here. Select the direction of the MEP here. Options to choose from are Up and Down. • Up - Specifies to create an inward facing (up) MEP. • Down - Specifies to create an outward facing (down) MEP. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Click the Show Detail button to view more detailed information about the specified MEP. Click the Remote MEP button to view the remove MEP table. Click the Edit LCK button to modify the LCK settings of the specified entry. Click the Edit DM button to access the CFM Delay Measurement (DM) settings. 407