D-Link DMS-3130 User Manual - Page 467

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 13-6 Configuration Restore from HTTP Window The fields that can be configured are described below: Parameter Unit Source File Destination File Replace Description Select the Switch unit that will be used for this configuration here. In this field the source configuration file's filename and path will be displayed after selection. To navigate to the location of the configuration file located on the local PC, either double click in the text box or click the Browse button. Enter the destination path and location where the configuration file should be stored on the Switch. (You can obtain the current directory structure on the Switch in Management > File System.) This field can be up to 64 characters long. Or select the running-config option to restore and overwrite the running configuration file on the Switch or select the startup-config option to restore and overwrite the start-up configuration file on the Switch. Select this option to replace the configuration file on the Switch with this one. Click the Restore button to initiate the configuration restore. Configuration Restore from TFTP This window is used to initiate a configuration restore from a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from TFTP, as shown below: Figure 13-7 Configuration Restore from TFTP Window 456