D-Link DMS-3130 User Manual - Page 383

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Profile Name Client MAC Description Enter the DHCP server screening profile name here. This name can be up to 32 characters long. Enter the MAC address used here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Click the Delete Profile button to remove the specified profile. The fields that can be configured in Log Information are described below: Parameter Log Buffer Entries Description Enter the logged buffer entries value here. This value must be between 10 and 1024. By default, this value is 32. Click the Apply button to accept the changes made. Click the Clear Log button to clear the log. DHCP Server Screening Port Settings This window is used to display and configure the DHCP server screening port settings. To view the following window, click Security > DHCP Server Screening > DHCP Server Screening Port Settings, as shown below: Figure 9-69 DHCP Server Screening Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port State Server IP Description Select the Switch unit that will be used for this configuration here. This option is only available if stacking is enabled. Select the appropriate port range used for the configuration here. Select to enable or disable the DHCP server screening function on the port(s) specified. Enter the DHCP server IP address here. 372