D-Link DMS-3130 User Manual - Page 268

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Join Prune Interval BSR Domain Border Description Enter the join prune interval. The range is from 1 to 18000. The default value is 60. Select to enable or disable the BSR Domain Border feature here. The default state is disabled. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. PIM BSR Candidate This window is used to display and configure the PIM Bootstrap Router (BSR) candidate settings. A bootstrap router (BSR) is designed for communicating RP information for the RP selection process in a Protocol Independent Multicast (PIM) domain. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM BSR Candidate, as shown below: Figure 6-78 PIM BSR Candidate Window The fields that can be configured are described below: Parameter Interface Name Hash Mask Length Priority Interval Description Specify the interface name. Enter the hash mask length for RP selection. The range is from 0 to 32. The default value is 30. Select Default to use the default value. Enter the priority for a BSR candidate. The range is from 0 to 255. The default value is 64. Select Default to use the default value. Enter the interval between originating Bootstrap message. The range is from 1 to 255. The default value is 60. Select Default to use the default value. Click the Add button to add the PIM BSR candidate. Click the Delete button to remove the specified entry. PIM RP Address This window is used to display and configure the PIM rendezvous point (RP) address settings. An RP is designated as the meeting point for all multicast data in PIM Sparse Mode (SM). To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP Address, as shown below: 257