D-Link DMS-3130 User Manual - Page 116

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Management > SD Card Management > SD Card Execute Settings, as shown below: Figure 4-89 SD Card Execute Settings Window The fields that can be configured in Execute Configuration are described below: Parameter File URL Increment Description Enter the URL of the file here. If the current directory is not the directory of SD card file system, then the full file path must be entered, for example, d:/path_name/file_name. Select to enable or disable the increment feature here. • When enabled, the current configuration will not be cleared before executing the configuration. • When disabled, the current configuration will be cleared before executing the configuration. Click the Apply button to accept the changes made. The fields that can be configured in SD Card Execute Settings are described below: Parameter Execute Entry Name Time Range Mode Description Enter the name of the execution entry here. This string can be up to 32 characters long. After clicking the Edit button, enter the time range schedule that will be used here. Refer to System > Time Range. After clicking the Edit button, select the mode here. Options to choose from are: • Increase - Specifies that the current configuration will not be cleared before executing the configuration. • Reset - Specifies that the current configuration will be cleared before executing the configuration. File Name State After clicking the Edit button, enter the source file path and name that will be executed here. After clicking the Edit button, select to enable or disable this schedule here. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to configure the specific entry. 105