D-Link DMS-3130 User Manual - Page 381

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide IPv6 Neighbor Binding This window is used to display and configure the IPv6 neighbor binding settings. To view the following window, click Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Neighbor Binding, as shown below: Figure 9-67 IPv6 Neighbor Binding Window The fields that can be configured in IPv6 Neighbor Binding Settings are described below: Parameter MAC Address VID IPv6 Address Unit From Port - To Port Description Enter the MAC address used here in the format:xx-xx-xx-xx-xx-xx (x is a hexadecimal digit). Enter the VLAN ID used here. This value must be between 1 and 4094. Enter the IPv6 address in the format: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (x is a hexadecimal digit). Select the Switch unit that will be used for this configuration here.This option is only available if stacking is enabled. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. The fields that can be configured in IPv6 Neighbor Binding Entry are described below: Parameter Unit From Port - To Port IPv6 Address MAC Address VID Description Select the Switch unit that will be used for this search here. This option is only available if stacking is enabled. Select the appropriate port range used for the search here. Enter the IPv6 address to find here. Enter the MAC address to find here. Enter the VLAN ID to find here. 370