D-Link DMS-3130 User Manual - Page 294
Aggregate Policer
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. Aggregate Policer This window is used to display and configure the aggregate policer settings. To view the following window, click QoS > Advanced Settings > Aggregate Policer, as shown below: Figure 7-14 Aggregate Policer (Single Rate Setting) Window The fields that can be configured are described below: Parameter Aggregate Policer Name Average Rate Normal Burst Size Maximum Burst Size Conform Action Description Enter the aggregate policer name here. This name can be up to 32 characters long. Do not include spaces. Enter the average rate value here. This value must be between 0 and 10000000 kbps. Enter the normal burst size value here. This value must be between 0 and 16384 Kbytes. Enter the maximum burst size value here. This value must be between 0 and 16384 Kbytes. Select the confirm action here. The confirm action specifies the action to take on green color packets. If the confirm action is not specified, the default action is to Transmit. Options to choose from are Drop, Set-DSCP-Transmit, Set1P-Transmit, Transmit, and Set-DSCP-1P. • When selecting the Drop option, the packet will be dropped. • When selecting the Set-DSCP-Transmit option, enter the IP DSCP value in the space provided. This value sets the IP differentiated services code point (DSCP) value and transmits the packet with the new IP DSCP value. • When selecting the Set-1P-Transmit option, enter the 1P transmit value in the space provided. This value sets the 802.1p value and transmits the packet with the new value. • When selecting the Transmit option, packets will be transmitted unaltered. 283