D-Link DMS-3130 User Manual - Page 279

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > VRRPv3 Settings, as shown below: Figure 6-91 VRRPv3 Settings Window The fields that can be configured are described below: Parameter VLAN VRID Address Family Description Enter the ID of the VLAN interface that will be used here. The range is from 1 to 4094. Refer to Layer 2 Features > VLAN for vlans created on the Switch and L3 Features > IPv6 Interface for IPv6 interface settings. Note that an IPv6 address must be configured first on the interface. Enter the ID of the virtual router that will be created here. The range is from 1 to 255. Select the address family used here. Options to choose from are: • IPv4 - Specifies to create an IPv4 virtual router. • IPv6 - Specifies to create an IPv6 virtual router. Interface Name Enter the name of the VLAN interface that will be used in the display here. This string can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Find button to find and display an entry based on the information entered. Click the Edit button to configure more detailed settings of the specified entry. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 268