D-Link DMS-3130 User Manual - Page 120
L2 Features > FDB > MAC Address Table Settings, Aging Time, Aging Destination Hit, Apply, MAC
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below: Figure 5-3 MAC Address Table Settings (Global Settings) Window The fields that can be configured are described below: Parameter Aging Time Aging Destination Hit Description Enter the MAC address table aging time here. This value must be between 10 and 1000000 seconds. Entering 0 will disable MAC address aging. By default, this value is 300 seconds. Select to enable or disable the aging destination hit function. Click the Apply button to accept the changes made. After selecting the MAC Address Port Learning Settings tab option, at the top of the page, the following page will be available. Figure 5-4 MAC Address Table Settings (MAC Address Port Learning Settings) Window The fields that can be configured are described below: Parameter Unit From Port - To Port Status Description Select the stacking unit ID of the Switch that will be configured here. This option is only available when stacking is enabled. Select the range of ports that will be used for this configuration here. Select to enable or disable the MAC address learning function on the ports specified here. Click the Apply button to accept the changes made. 109