D-Link DMS-3130 User Manual - Page 128
Allowed VLAN Range
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide When Trunk was selected as the VLAN Mode, the following page will appear. Figure 5-14 VLAN Interface (Trunk) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking Native VLAN VID Action Clone Description Select one of the following VLAN mode: Hybrid, Access, Trunk, 802.1QTunnel, Promiscuous, or Host. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select whether the frames should be checked for its acceptance when entering the port. Tick this option to enable the native VLAN function. Also select if this VLAN supports Untagged or Tagged frames. After ticking the Native VLAN option the following parameter will be available. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select how the frames should be processed for this VLAN: None, All, Add, Remove, Except, Replace. For Add, Remove, Except, and Replace, enter the VLAN range in Allowed VLAN Range to perform the selected operation. Select this option to clone the configured information to the selected ports. Specify the From Port and To Port for the port range. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. 117