D-Link DMS-3130 User Manual - Page 122

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > FDB > MAC Address Table, as shown below: Figure 5-6 MAC Address Table Window The fields that can be configured are described below: Parameter Port VID MAC Address Description Select the stacking unit ID and the port number of the Switch that will be configured here. The unit ID option is only available when stacking is enabled. Enter the VLAN ID that will be used for this configuration here. Enter the MAC address that will be used for this configuration here. Click the Clear Dynamic by Port button to clear the dynamic MAC address listed on the corresponding port. Click the Clear Dynamic by VLAN button to clear the dynamic MAC address listed on the corresponding VLAN. Click the Clear Dynamic by MAC button to clear the dynamic MAC address entered. Click the Find button to locate a specific entry based on the information entered. Click the Clear All button to clear all dynamic MAC addresses. Click the Show All button to display all the MAC addresses recorded in the MAC address table. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Notification This window is used to display and configure MAC notification. 111