D-Link DMS-3130 User Manual - Page 183

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Exceed Action Description Select Drop, Default, or Replace when the the number of IGMP multicast groups exceeds the above limit to specify the action for handling newly learned groups. Options to choose from are Default, Drop and Replace. • Default - Specifies that the default action will be taken. • Drop - Specifies that the new group will be dropped. • Replace - Specifies that the new group will replace the oldest group. Also enter the VLAN ID in VID when Replace is selected. Except ACL Name VID Enter the standard IP access list name here. The group (*,G) permitted by the access list will be excluded from the limit. To permit a group (*,G), specify "any" in the source address field and G in the destination address field of the access list entry. This name can be up to 32 characters long. Alternatively, click the Please Select button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Enter the Layer 2 VLAN ID on a trunk port here. This applies the filter to packets that arrive on that VLAN. The range is from 1 to 4094. Click Apply to save your changes. Or click Delete to delete a VLAN ID of the entered information of the above fields. The fields that can be configured in Access Group Settings are described below: Parameter Unit From Port - To Port Action ACL Name VID Description Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the appropriate port range used for the access group configuration here. The Access Group allows you to define different IGMP snooping limit settings for a port that belongs to multiple VLANs or Access Control List. Select Add or Delete to add or delete the entered information of an access group. Enter the standard IP access list name here if Add is selected in the Action field. This name can be up to 32 characters long. Alternatively, click the Please Select button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Enter the VLAN ID used for this configuration here. The range is from 1 to 4094. The fields that can be configured in IGMP Snooping Filter Table are described below: Parameter Unit From Port - To Port Description Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the appropriate port range used for display here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. Click Show Detail to view detail information of a specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 172