D-Link DMS-3130 User Manual - Page 333
Port Security Port Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in Port Security Trap Settings are described below: Parameter Trap State Description Select to enable or disable port security traps on the Switch. Click the Apply button to accept the changes made. The fields that can be configured in Port Security Trap Rate Settings are described below: Parameter Description Trap Rate Enter the number of traps per second. The range is from 0 to 1000. The default value 31 indicates an SNMP trap to be generated for every security violation. Click the Apply button to accept the changes made. The fields that can be configured in Port Security System Settings are described below: Parameter System Maximum Address Description Enter the maximum number of secure MAC addresses allowed. If not specified, the default value is No Limit. The valid range is from 1 to 12288. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. The fields that can be configured in Port Security VLAN Settings are described below: Parameter VID List VLAN Max Learning Address Description Enter the VLAN ID(s) here. Use "-" to specify a range of ports and "," to separate multiple ports. Enter the maximum number of allowed MAC addresses that can be learned on the specified VLAN(s) here. The range is from 1 to 12288. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. The fields that can be configured in Find VLAN are described below: Parameter VID Description Enter the VLAN ID that will be located here. Click the Find button to locate a specific entry based on the information entered. Port Security Port Settings This window is used to display and configure the port security port settings. To view the following window, click Security > Port Security > Port Security Port Settings, as shown below: 322