D-Link DMS-3130 User Manual - Page 471
Target IPv4 Address
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 471 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide - Figure 13-12 Ping Window The fields that can be configured in Ping Access Class are described below: Parameter ACL Name Action Description Enter the name of the ACL that will be used here. This name can be up to 32 characters long. Click the Please Select button to select an existing ACL from the list. Select the action to be taken here. Options to choose from are Add and Clear. Click the Apply button to accept the changes made. The fields that can be configured in IPv4 Ping are described below: Parameter Target IPv4 Address Domain Name Ping Times Timeout Frequency Length ToS Stop Time Description Select and enter an IP address to be pinged. Select and enter the domain name of the system to discover. Enter the number of times desired to attempt to Ping the IPv4 address configured in this window. Users may enter the number of times between 1 and 255. Tick the Infinite check box to keep sending ICMP Echo packets to the specified IP address until the program is stopped. Select a timeout period between 1 and 99 seconds for this Ping message to reach its destination. If the packet fails to find the IP address in this specified time, the Ping packet will be dropped. Enter the time interval between each Internet Control Message Protocol (ICMP) request. The range is from 0 to 86400 and the default is 0. Enter the length value here. This specifies the number of data bytes to send. The default value is 56, which translates into 64 ICMP data bytes when combined with the 8 bytes of ICMP header data. It does not include any VLAN or IEEE 802.1Q tag length. The range is from 1 to 1452 bytes. Enter the ToS value here. This is used to configure the QoS on ICMP datagrams. The range is from 0 to 255. Enter the stop time value here. This specifies to stop the ping after the number of times entered here. If this value is configured as 0, then the ping can only be stopped by clicking the Stop button manually. The range is from 0 to 99. 460