D-Link DMS-3130 User Manual - Page 182

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. IGMP Snooping Filter Settings This window is used to display and configure the IGMP snooping filtering. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Filter Settings as shown below: Figure 5-69 IGMP Snooping Filter Settings Window The fields that can be configured in IGMP Snooping Rate Limit Settings are described below: Parameter Unit From Port - To Port Limit Number Action VID Description Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the appropriate port range used for the configuration here. Enter the limit number here. This is to configure the rate of IGMP control packets that the Switch can process on a specific interface (1-1000). Select No Limit to not restrict this value. Select VLAN or Port to force the restriction based on the specify VLAN ID or port range. If VLAN is selected, enter the VLAN ID in VID. If Port is selected, select the above port range. Enter the VLAN ID here. This is the Layer 2 VLAN on a trunk port and applies the filter to packets that arrive on that VLAN. The range is from 1 to 4094. This is only available if the VLAN option was selected as the action. The fields that can be configured in IGMP Snooping Limit Settings are described below: Parameter Unit From Port - To Port Limit Number Description Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the appropriate port range used for the configuration here. Set a limit for the number of multicast groups (1-1024). Select No Limit to not restrict this value. 171