D-Link DMS-3130 User Manual - Page 162

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > STP > MST Configuration Identification, as shown below: Figure 5-48 MST Configuration Identification Window The fields that can be configured for MST Configuration Identification are described below: Parameter Configuration Name Revision Level Description Enter the MST. This name uniquely identifies the MSTI (Multiple Spanning Tree Instance). If a Configuration Name is not set, this field will show the MAC address to the device running MSTP. Enter the revision level value here. This value must be between 0 and 65535. By default, this value is 0. This value, along with the Configuration Name, identifies the MSTP region configured on the Switch. Click the Apply button to accept the changes made. In the Private VLAN Synchronize section, the user can click the Apply button to synchronize the private VLANs. The fields that can be configured for Instance ID Settings are described below: Parameter Instance ID Action VID List Description Enter the instance ID here. This value must be between 1 and 64. Select the action that will be taken here. Options to choose from are Add VID and Remove VID. Enter the VID list value here. This field is used to specify the VID range from configured VLANs set on the Switch. Use "-" to specify a range of VIDs and "," to separate multiple VIDs. For example, 6,8-10. Click the Apply button to accept the changes made. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 151