D-Link DMS-3130 User Manual - Page 64
Session Timeout
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in Telnet Settings are described below: Parameter Telnet State Port Description Select to enable or disable the Telnet server feature here. Enter the TCP port number used for Telnet management of the Switch. The well-known TCP port for the Telnet protocol is 23. Click the Apply button to accept the changes made. The fields that can be configured in Source Interface are described below: Parameter Source Interface State Type VID Description Select to enable or disable the source interface's state here. Select the type of source interface that will be used here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the interface ID here. For loopback interfaces the range is from 1 to 8. For the management (Mgmt) interface this value can only be 0. For VLAN interfaces the range is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in Web Settings are described below: Parameter Web State Port Description Select this option to enable or disable the configuration through the web. Enter the TCP port number used for web management of the Switch. The wellknown TCP port for the World Wide Web protocol is 80. Click the Apply button to accept the changes made. Session Timeout This window is used to display and configure the session timeout settings. To view the following window, click Management > Session Timeout, as shown below: Figure 4-24 Session Timeout Window The fields that can be configured are described below: Parameter Web Session Timeout Description Enter the time in seconds of the web session timeout. Tick the Default check box to return to the default setting. The value is from 60 to 36000 seconds. The default value is 180 seconds. 53