D-Link DMS-3130 User Manual - Page 119
MAC Address Table Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Multicast Static FDB This window is used to display and configure the multicast static FDB settings. To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below: Figure 5-2 Multicast Static FDB Window The fields that can be configured are described below: Parameter Unit From Port - To Port VID MAC Address Description Select the stacking unit ID of the Switch that will be configured here. This option is only available when stacking is enabled. Select the range of ports that will be used for this configuration here. Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. The format of the destination MAC address is: x1-xx-xx-xx-xx-xx x5-xx-xx-xx-xx-xx x9-xx-xx-xx-xx-xx xD-xx-xx-xx-xx-xx (where X is a hexadecimal character). Click the Apply button to accept the changes made. Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Address Table Settings This window is used to display and configure the global MAC address table settings. 108