D-Link DMS-3130 User Manual - Page 441
DDM TX Power Threshold Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit Port Action Type Value Description Select the Switch unit that will be used for this configuration here. Select the port used for the configuration here. Note: Port number specific to fiber optical transceivers will not be available if stacking is enabled (refer to Management > Stacking). Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of bias current threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Enter the threshold value. This value must be between 0 and 131 mA. Click the Apply button to accept the changes made. DDM TX Power Threshold Settings This window is used to display and configure the threshold of TX power for specific ports on the Switch. To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as shown below: Figure 10-31 DDM TX Power Threshold Settings Window The fields that can be configured are described below: Parameter Unit Port Action Type Power Unit Value Description Select the Switch unit that will be used for this configuration here. Select the port used for the configuration here. Note: Port number specific to fiber optical transceivers will not be available if stacking is enabled (refer to Management > Stacking). Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of TX power threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Select the power unit here. Options to choose from are mW and dBm. Enter the threshold value either in mW or dBm here. • When selecting mW in the Power Unit drop-down list, this value must be between 0 and 6.5535. 430