D-Link DMS-3130 User Manual - Page 299

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide

288

Figure 7-17 Policy Map (Set Action) Window

The fields that can be configured are described below:

Parameter

Description

None

Select this option to specify that no action will be taken.

Specify

Select this option to specify that action will be taken based on the

configurations made.

New Precedence

Select the new precedence value for the packet here. The range is from 0 to 7.

Select the

IPv4 only

option to specify that IPv4 precedence will be marked

only. If not selected, then both IPv4 and IPv6 precedence will be marked. For

IPv6 packets, the precedence is the most three significant bits of the traffic

class of the IPv6 header. Setting the precedence will not affect the CoS queue

selection.

New DSCP

Select the new DSCP value for the packet here. The range is from 0 to 63.

Select the

IPv4 only

option to specify that the IPv4 DSCP will be marked only.

If not selected, then both the IPv4 and IPv6 DSCP will be marked. Setting the

DSCP will not affect the CoS queue selection.

New CoS

Select the new CoS value to the packet here. The range is from 0 to 7. Setting

the CoS will not affect the CoS queue selection.

New Cos Queue

Select the new CoS queue value to the packets here. This will overwrite the

original CoS queue selection. Setting the CoS queue will not take effect if the

policy map is applied for the egress flow on the interface.

Click the

Back

button to return to the previous window.

Click the

Apply

button to accept the changes made.

After clicking the

Policer

button, the following page will appear.

D-Link DMS-3130 User Manual - Page 299

Specify, New Precedence, IPv4 only, New DSCP, New CoS, New Cos Queue, Apply, Policer

Page 299 highlights