D-Link DMS-3130 User Manual - Page 412

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Policy Name Version Session Cache Timeout Secure Trustpoint Cipher Suites Description Enter the SSL service policy name here. This name can be up to 32 characters long. Select the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) version here. Options to choose from are SSL 3.0, TLS 1.0, TLS 1.1, and TLS 1.2. Enter the session cache timeout value used here. This value must be between 60 and 86400 seconds. By default, this value is 600 seconds. Enter the secure trust point name here. This name can be up to 32 characters long. Select the cipher suites that will be associated with this profile here. The available options are: DHE_DSS_WITH_3DES_EDE_CBC_SHA, RSA_WITH_3DES_EDE_CBC_SHA, RSA_WITH_RC4_128_SHA, RSA_EXPORT_WITH_RC4_40_MD5c, RSA_WITH_RC4_128_MD5, RSA_WITH_AES_128_GCM_SHA256, RSA_WITH_AES_256_GCM_SHA384, ECDHE_RSA_WITH_AES_128_GCM_SHA256, ECDHE_RSA_WITH_AES_256_GCM_SHA384. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specified entry. SFTP Server Settings This window is used to display and configure the Secure File Transfer Protocol (SFTP) server settings. SFTP is a remotely secure file transfer protocol over a reliable data stream. Because SFTP itself does not provide authentication and security, the SFTP server runs as a sub-system of the SSH server. NOTE: Only IPv4 SFTP servers are supported. To view the following window, click Security > SFTP Server Settings, as shown below: Figure 9-100 SFTP Server Settings Window The fields that can be configured are described below: 401