D-Link DMS-3130 User Manual - Page 270

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Group Address Group Mask Description Specifies the IP multicast group address. Valid address range is from 224.0.0.0 to 239.255.255.255. Alternatively, select All Address. Specifies the IP multicast group mask. Alternatively, select All Address. Click the Apply button to accept the changes made. Click the Add button to add the PIM RP candidate. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. PIM RP Table This window is used to find and display the PIM RP table. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP Table, as shown below: Figure 6-81 PIM RP Table Window The fields that can be configured are described below: Parameter RP Hash Description Enter the RP hash here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to locate and display all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. PIM Neighbor Table This window is used to find and display the PIM neighbor table. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM Neighbor Table, as shown below: Figure 6-82 PIM Neighbor Table Window The fields that can be configured are described below: Parameter Interface Name Description Enter the Interface Name here. Refer to L3 Features > Interface. 259