D-Link DMS-3130 User Manual - Page 129

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide When 802.1Q-Tunnel was selected as the VLAN Mode, the following page will appear. Figure 5-15 VLAN Interface (802.1Q-Tunnel) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VID Action Clone Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk Secondary. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select whether the frames should be checked for its acceptance when entering the port. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select Add to add a new entry based in the information entered. Select Remove to remove an entry based in the information entered. If Add is selected, enter the VLAN range in Allowed VLAN Range to add the port to and specify whether it is tagged or untagged member of the VLAN. Select this option to clone the configured information to the selected ports. Specify the From Port and To Port for the port range. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. When Promiscuous was selected as the VLAN Mode, the following page will appear. Figure 5-16 VLAN Interface (Promiscuous) Window 118