D-Link DMS-3130 User Manual - Page 363
DHCP Snooping Binding Entry
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. The fields that can be configured in Load DHCP Snooping Database are described below: Parameter URL Description Select the location from the drop-down list and enter the URL where the DHCP snooping database will be stored at here. Locations to choose from are TFTP, FTP, and Flash. An example URL is given. Click the Apply button to accept the changes made. Click the Clear button to clear all the counter information. DHCP Snooping Binding Entry This window is used to display and configure the DHCP snooping binding entries. To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Binding Entry, as shown below: Figure 9-44 DHCP Snooping Binding Entry Window The fields that can be configured are described below: Parameter MAC Address VID IP Address Unit Port Expiry Description Enter the MAC address of the DHCP snooping binding entry here. Enter the VLAN ID of the DHCP snooping binding entry here. This value must be between 1 and 4094. Enter the IP address of the DHCP snooping binding entry here. Select the Switch unit that will be used for this configuration here.This option is only available if stacking is enabled. Select the appropriate port used for the configuration here. Enter the expiry time value used here. This value must be between 60 and 4294967295 seconds. Click the Add button to add a new entry based on the information entered. 352