D-Link DMS-3130 User Manual - Page 231
RIP Global Settings, RIP State, Apply, Redistribution Configuration, Redistribution, Connected,
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Figure 6-27 RIP Settings Window The fields that can be configured in RIP Global Settings are described below: Parameter RIP State Description Select to globally enable or disable the Routing Information Protocol (RIP) feature here. Click the Apply button to accept the changes made. The fields that can be configured in Redistribution Configuration are described below: Parameter Redistribution Description • First, select to enable or disable the RIP redistribution feature here. • Second, select the routing protocol (domain) that will be redistributed into RIP. Options to choose from are Connected, OSPF and Static. The Static option means redistribute IP static routes. The Connected option refers to routes that are established automatically through configuring an IP address on an interface. • Third, enter the value to be used as the metric for the redistributed route here. The range is from 0 to 16. • Fourth, enter the Route Map name that is used in the filtering of the routes to be redistributed to the current routing protocol. If not specified, all routes are redistributed. Click the Apply button to accept the changes made. The fields that can be configured in RIP Configuration are described below: 220