D-Link DMS-3130 User Manual - Page 191

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Click the Find button to locate a specific entry based on the information entered. Click the Show All button to view all the entries. MLD Snooping Filter Settings This window is used to display and configure the MLD snooping settings. To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Filter Settings, as shown below: Figure 5-76 MLD Snooping Filter Settings Window The fields that can be configured in MLD Snooping Rate Limit Settings are described below: Parameter Unit From Port - To Port Limit Number Action Description Select the Switch unit ID that will be used here.This option is only available when stacking enabled. Select the Switch port range that will be used here. This is only available if the Port option was selected as the action below. Enter the limit number here. This is to configure the rate of MLD control packets that the Switch can process on a specific interface. The range is from 1 to 1000 packets per second. Select the No Limit option to remove the limitation. Select the action that will be taken here. Options to choose from are Port and VLAN. 180