D-Link DMS-3130 User Manual - Page 402

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter From Port - To Port Forward Unit From Forward Port ~ To Forward Port Description Select the receiving port range used for the configuration here. Select the forward Switch unit that will be used for this configuration here. Select the forward port range used for the configuration here. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove an entry based on the information entered. Storm Control This window is used to display and configure the storm control settings. To view the following window, click Security > Storm Control, as shown below: Figure 9-87 Storm Control Window The fields that can be configured in Storm Control Trap Settings are described below: Parameter Trap State Description Select the storm control trap option here. Options to choose from are None, Storm Occur, Storm Clear, and Both. When None is selected, no traps will be sent. When Storm Occur is selected, a trap notification will be sent when a storm event is detected. When Storm Clear is selected, a trap notification will be sent when a storm event is cleared. Click the Apply button to accept the changes made. The fields that can be configured in Storm Control Polling Settings are described below: Parameter Interval Retries Description Enter the interval value used here. This value must be between 5 and 600 seconds. By default, this value is 5 seconds. Enter the retries value used here. This value must be between 0 and 360. By default, this value is 3. Tick the Infinite option to disable this feature. Click the Apply button to accept the changes made. 391