D-Link DMS-3130 User Manual - Page 230
RIP Settings
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in ECMP Load Balancing Settings are described below: Parameter Destination IP Source IP CRC 32 Lower CRC 32 Upper TCP/UDP Port Description Select this option to use the destination IP address as the ECMP hash key. Select this option to use the least significant bits of the source IP address as the ECMP hashing algorithm. Select this option to use the lower bits of CRC-32 as the ECMP hashing algorithm. Select this option to use the upper bits of CRC-32 as the ECMP hashing algorithm. Select this option to use TCP/UDP port number as ECMP hash key. Click the Apply button to accept the changes made. The fields that can be configured in ECMP Advance Control Mode are described below: Parameter ECMP Advance Control Mode Setting Description Select the ECMP advance control mode settings here. This specifies the number of ECMP or multipath routes and the number of next-hops of each ECMP or multipath route that will be changed according to the specified value. Options to choose from are 64, 128, 256, and 512. Click the Apply button to accept the changes made. RIP RIP Settings This window is used to display and configure Routing Information Protocol (RIP) settings. To view the following window, click L3 Features > RIP > RIP Settings, as shown below: 219