D-Link DMS-3130 User Manual - Page 308

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Figure 8-6 ACL Configuration Wizard (Create, Packet Type, IPv6) Window The fields that can be configured are described below: Parameter Sequence No. Protocol Type Description Enter the ACL rule number here. This value must be between 1 and 65535. Select Auto Assign to automatically generate an ACL rule number for this entry. For IPv4, select the protocol type option here: Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, EIGRP (88), ESP (50), GRE (47), IGMP (2), OSPF (89), PIM (103), VRRP (112), IP-in-IP (94), PCP (108), Protocol ID, and None. • Value - The protocol ID can also manually be entered here. The range is from 0 to 255. • Mask - After selecting the Protocol ID option, manually enter the protocol mask value here. The range is from 0x0 to 0xFF. • Fragments - Select this option to include packet fragment filtering. • IGMP Type - Enter the IGMP sypte. The range is from 0 to 255 if IGMP is selected for protocol type. For IPv6, select the protocol type option here: Options to choose from are TCP, UDP, ICMP, Protocol ID, ESP (50), PCP (108), SCTP (132), and None. • Value - The protocol ID can also manually be entered here. The range is from 0 to 255. • Mask - After selecting the Protocol ID option, manually enter the protocol mask value here. The range is from 0x0 to 0xFF. • Fragments - Select this option to include packet fragment filtering. Assign Rule Criteria Time Range Action For Assign Rule criteria, refer the IP/IPv6 ACL configuration in the following ACL Access List section. Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Refer to System > Time Range. Select the action that this rule will take here. Options to choose from are Permit and Deny. Click the Next button to continue to the next step. 297