D-Link DMS-3130 User Manual - Page 133
GVRP Port
View all D-Link DMS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter Dynamic VLAN Creation NNI BPDU Address Description Select to enable or disable the dynamic VLAN creation function here. Select the NNI BPDU address option here. This option is used to determine the BPDU protocol address for GVRP in customer networks. It can use 802.1d GVRP address or 802.1ad service provider GVRP address. Options to choose from are Dot1d and Dot1ad. Click the Apply button to accept the changes made. GVRP Port This window is used to display and configure the GVRP port settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Port, as shown below: Figure 5-21 GVRP Port Window The fields that can be configured are described below: Parameter Unit From Port - To Port GVRP Status Join Time Leave Time Leave All Time Description Select the Switch unit that will be used for this configuration here. This option is only available when stacking is enabled. Select the range osf ports that will be used for this configuration here. Select the enable or disable the GVRP port status. This enables the port to dynamically become a member of a VLAN. By default, this option is disabled. Enter the Join Time value in centiseconds (0.01 second). This value must be between 10 and 10000 centiseconds. By default, this value is 20 centiseconds. Enter the Leave Time value in centiseconds (0.01 second). This value must be between 10 and 10000 centiseconds. By default, this value is 60 centiseconds. Enter the Leave All Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 1000 centiseconds. Click the Apply button to accept the changes made. 122